Система контроля давления шин

[maydayanthem]

Сообщение от Natali_K

xmax, ну если есть свободные руки то ставится...

first, sorry for english, but i´m not from russia, despite of it i hope, someone will be so kind to help me or give me some new information... you can write russian, it is no problem for me, i´m able to read it, but writting is little bit hard for me... thanx a lot

so, my megane 3 (2009) is only keyless, not hands free
i activated SMTP, of course i can´t see wheels and real values of pressure on display, there is only car without wheels and it is written - sensor absent
but there is another important thing, can someone explain this situation:
if the pressure in the wheel is under normal value there is suddenly an information on the display - if the damaged wheel is front left, then on the display is front left wheel black, on the right display there is a message "Puncture"... all this information are visible within 5-10 second after the wheel has lower pressure.. and this is not all, in the CLIP i can see the exact value of the tire, BUT !!! the value is visible only if the front wheels are between 0 - 1,6 bar and rear wheel 0 - 1,3 bar, normally it is shown 3,5 bar on the display

i cant understand it
i suppose, there is one-way communication from sensor to UCH, the information is displayed only if there is a problem with wheel, but why it is not shown for the whole time, or why the values are not shown 1,4 (1,7) bar and higher...

thank you for your all ideas

some photos in attachment